NEC UNIVERGE SL2100, Networking Manual

Page: 44 / 196

Program 84 : Hardware Setup for VoIPDB
84-10 : ToS Setup
Level:
IN
Description
Use Program 84-10 : ToS Setup to set up the Type of Service data.
Input Data
Protocol Type
1 = Not Used
2 = Not Used
3 = Reserved
4 = H.323
5 = RTP/RTCP
6 = SIP
7 = Reserved
8 = SIP MLT
9 = SIP Trunk
10 = Reserved
11 = Reserved
Item
No.
Item Input Data Description Default
01 ToS Mode 0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv When Input Data is set to 1, Item No. 07 is
invalid. When Data is set to 2, Item No. 02
~ 05 are invalid. 0
02 Priority, IP Prece-
dence 0 ~ 7
0 = Low
7 = High 1 = Router queuing priority 0
03 Low Delay 0 ~ 1
0 = Normal Delay
1 = Low Delay 1 = Optimize for low delay routing 0
04 Wideband (Through-
out) 0 ~ 1
0 = Normal Throughput
1 = High Throughput 1 = Optimize for high bandwidth routing 0
05 High Reliability 0 ~ 1
0 = Normal Reliability
1 = Low Reliability 1 = Optimize for reliability routing 0
07 Priority (D.S.C.P. - Dif-
ferentiated Services
Code Point) 0 ~ 63 DSCP (Differentiated Services Code Point) 0
Conditions
• The system must be reset for these program options to take affect.
Feature Cross Reference
None
SL2100 ISSUE 1.0
5-24 Program 84 : Hardware Setup for VoIPDB
Program
84