NEC UNIVERGE SL2100, Networking Manual

Page: 158 / 196

S
ECTION
4 MINIMUM REQUIRED PROGRAMMING
The Level 1 , Level 2 and Level 3 columns indicate the programs that are assigned when
programming this feature in the order they are most commonly used. These levels are used with
PCPro and WebPro wizards for feature programming.
• Level 1 – these are the most commonly assigned programs for this feature.
• Level 2 – these are the next most commonly assigned programs for this feature.
• Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data Level
1 2 3
10-12-01 CPU Network Setup - IP Address Assign the IP Address for the
CPU's NIC card. If a VoIPDB is in-
stalled in the system it is recom-
mended to set this to 0.0.0.0 and
all connections to the system will
be made through the VoIPDB. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default =192.168.0.10)
✓
10-12-03 CPU Network Setup – Default
Gateway Assign the default gateway IP ad-
dress for the CPU. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0) ✓
10-12-07 CPU Network Setup – NAPT Rout-
er IP Address
(Default Gateway [WAN]) Define the IP Address of the WAN
side of the router. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0) ✓
10-12-09 CPU Network Setup – IP Address Assign the IP Address for the
VoIPDB. If a VoIPDB is installed
in the system it is recommended
to set PRG 10-12-01 to 0.0.0.0
and all connections to the system
will be made through the VoIPDB. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
✓
SL2100 ISSUE 1.0
11-4 NAPT