NEC UNIVERGE SL2100, Networking Manual

Page: 150 / 196

Program
Number
Program Name Description/
Comments
Assigned Data 1 2 3
84-19-69 SIP Extension CODEC Informa-
tion Basic Setup – Initial Jitter
Buffer for Video This setup specifies the
initial value of jitter buffer
for the video stream.
This value must be
smaller than the value of
the maximum jitter buffer
and be bigger than the
value of the minimum jit-
ter buffer. 0 ~ 1000 (ms)
Default is 140
84-19-70 SIP Extension CODEC Informa-
tion Basic Setup – Maximum
Jitter Buffer for Video This setup specifies the
maximum value of jitter
buffer for the video
stream. It is used only
when "67-Jitter Buffer
Mode for video" is
1:Fixed.
This value must be big-
ger than the value of the
minimum jitter buffer. 0 ~ 1000 (ms)
Default is 210
2.2.6 SIP Extension Basic Information Setup
Program
Number
Program Name Description/
Comments
Assigned Data 1 2 3
84-20-01 SIP Extension Basic Informa-
tion Setup – Registrar/Proxy
Port Define SIP station Proxy
Port. 1~65535
Default is 5070 X
84-20-02 SIP Extension Basic Informa-
tion Setup – Session Timer Val-
ue Define the periodic re-
fresh time that allows
both user agents and
proxies to determine if
the SIP session is still
active. 0~65535
Default is 180 X
84-20-03 SIP Extension Basic Informa-
tion Setup – Minimum Session
Timer Value Define to convey the
minimum allowed value
for the SIP session timer. 0~65535
Default is 180 X
84-20-04 SIP Extension Basic Informa-
tion Setup – Called Party Info Define the SIP Extension
presented Caller ID infor-
mation. 0 = Request URI
1 = To Header
Default is 0 X
84-20-05 SIP Extension Basic Informa-
tion Setup – Expire Value of In-
vite Define the time out re-
sponse value for SIP in-
vite. 0~256 seconds
Default is 180 X
84-20-06 Expire Value of Invite (send) The expiration time is set
for the Invite message. 1~3600 seconds
Default is 180 X
2.2.7 IP Phone Configuration
Program
Number
Program Name Description/
Comments
Assigned Data 1 2 3
15-05-01 IP Telephone Terminal Basic
Data Setup – Terminal Type Review the type protocol
support by the IP Phone.
Viewing Only – No
changes permitted. 0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = SIP-MLT
READ ONLY
Default = 3 X
SL2100 ISSUE 1.0
10-6 IP Single Line Telephone