NEC UNIVERGE SL2100, Hardware Manual

Page: 87 / 174

S
ECTION
3 INSTALLING THE EXPANSION INTERFACE BOARDS
3.1 General
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
The system does NOT ALLOW to accommodate both Digital (2W) and Hybrid
(4W) Multiline Terminal at the same time on a system. Type of available
Multiline Terminals shall be defined whether 082U board can be detected at
Main Chassis or not during the system start-up in progress by COLD start.
Except 1PRIDB daughter board, up to four expansion interface boards can be installed per Chassis.
Equipment Name Equipment Description Note
IP7WW-308U-A1 3 Analog 8 Hybrid (4W) Extensions Board
IP7WW-082U-B1 8 Digital Exte 2 Analog Extensions Board
IP7WW-008U-C1 8 Hybrid (4W)/Analog Extensions Board
IP7WW-000U-C1 0 Extensions Board (for Trunk DB)
IP7WW-3COIDB-C1 3 Analog Trunks Daughter Board (mount to 082U/008U/000U)
IP7WW-2BRIDB-C1 2 ISDN BRI Daughter Board (mount to 082U/008U/000U)
IP7WW-1PRIDB-C1 1 ISDN PRI/T1/E1(for Latin America) Daughter Board (mount to 082U/
008U/000U)
• The function of IP7WW-000U-C1 board is just a mounting board for the 3COIDB, 2BRIDB or 1PRIDB.
• One 1PRIDB can be installed per one chassis.
• The 3COIDB-B1, 2BRIDB-C1 and 1PRIDB-C1 can be installed in following combinations;
Daughter Board
Option Board
308U-A1 082U-B1 008U-C1 000U-C1
3COIDB-C1 No Yes Yes Yes
2BRIDB-C1 No Yes Yes Yes
1PRIDB-C1 No Yes Yes Yes
3.2 Unpacking
Unpack the 308U-A1/082U-B1/008U-C1/000U-C1/3COIDB-C1/2BRIDB-C1/1PRIDB-C1 and check it
against the following list. Inspect for physical damage.
Table 2-12 Expansion Board Packing List
Items List of Contents QTY Note
IP7WW-308U-A1 308U-A1 Board 1
IP7WW-082U-B1 082U-B1 Board 1
IP7WW-008U-C1 008U-C1 Board 1
IP7WW-000U-C1 000U-C1 Board 1
IP7WW-3COIDB-C1 3COIDB-C1 Board 1
Screw (with Washer and Spring Washer) 1
ISSUE 1.0 SL2100
Hardware Manual 2-41