NEC UNIVERGE SL2100, Hardware Manual

Page: 122 / 174

5.3 Installing the DSS Console
The 60D DSS-A1 Console can be installed on the last hybrid extension ports (ST8/ST16/ST24/ST40/
ST48/ST56/ST72/ST80/ST88) of each 308U-A1/008U-C1 board directly. The 60D DSS-B1 Console
can be installed on any digital extension port of each 082U-B1 board directly. The pair extension for
the DSS Console is assigned using system programming.
For the settings, refer to the SL2100 Features & Specifications Manual.
5.3.1 DSS Console Leg Adjustment
The DSS Console provides the leg for angling the console to best suit each user. The leg can be set
for two different heights (Low/High).
5.3.1.1 Low Position Setting
1. Turn DSS Console over (button side down).
2. Adjust the legs to desired height.
< Low position >
Leg
Figure 2-103 Low Position Setting
3. Lead the Line cord through the applicable grooves.
Figure 2-104 Cabling of DSS
5.3.1.2 High position setting
1. Turn DSS Console over (button side down).
SL2100 ISSUE 1.0
2-76 Installation