NEC UNIVERGE SL2100, Hardware Manual

Page: 110 / 174

6. Connect the VOIPDB-C1 to a Switching hub using a LAN Cable.
ST
100
1G
ACT LOAD
RUN
ETHERNET
VO
IP
DB
EXP1
EXP2
ALM
to HUB
LAN Cable
< Side View >
VOIPDB-C1 board
(J6)
Figure 2-82 Connecting a LAN Cable
7. Refer to the SL2100 Programming Manual for detailed programming instructions.
The VoIP feature requires system configuration.
4.1.4 LED Indication
LED indications for the IP7WW-VOIPDB-C1 are listed Table 2-27 VOIPDB LED Indications on
page 2-64 . Each LED is listed with its associated function and operational status.
ST
100
1G
ACT
LOAD
RUN
ETHERNET
VO
IP
DB
EXP1
EXP2
ALM
< Side View >
ST
VOIPDB-C1 board
LINK100
LINK1000
ACT
Figure 2-83 Location of LEDs
Table 2-27 VOIPDB LED Indications
LED Function LED Status Operation status
ACT Link activity or data transmission and re-
ception.
On Green LED lights when link up is completed. LED flash
when data is transmitting or receiving.
LINK1000 1000Base-T link speed indicator On Yellow Lights up when 1000Base-T link up.
LINK100 100Base-TX link speed indicator. On Red Lights up when 100Base-TX link up.
SL2100 ISSUE 1.0
2-64 Installation