NEC UNIVERGE SL2100, Hardware Manual

Page: 121 / 174

3. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
Figure 2-92 Hook-Switch Hanger on page 2-70 .
Hook-switch hanger Hook-switch hanger
Figure 2-100 Hook-Switch Hanger
4. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12″).
7 - 9.5 mm
(0.28″ - 0.37″)
83.5 mm
(3.287″)
Minimum 10 mm (0.39″)
3 - 4 mm
(0.12″ - 0.16″)
1 - 3 mm
(0.04″ - 0.12″)
Figure 2-101 Wall-Mount Screw Guide
5. Mount the telephone on the wall.
Wall-mounting
holes
Wall side
Figure 2-102 Mounting the IP Multiline Telephone
ISSUE 1.0 SL2100
Hardware Manual 2-75