NEC UNIVERGE SL2100, Hardware Manual

Page: 59 / 174

1.7.2 Installation of the EXIFB-C1
1.7.2.1 Unpacking
Unpack the EXIFB-C1 and check it against physical damage.
Table 2-5 EXIFB-C1 Packing List
Items List of Contents QTY
EXIFB-C1 EXIFB-C1 Board 1
Metal Spacers 4
Screws (with Circular Washer) 4
Springwashers 4
Nuts 4
1.7.2.2 Connectors Location
J3
J1 (EXP1)
J2 (EXP2)
Figure 2-16 Connectors of EXIFB-C1
Table 2-6 Connectors of EXIFB-C1
No. Connectors Connectable Devices
J1 (EXP1) Expansion Connector J2 (EXP) connector on the EXIFE-C1 board of the Expansion Chassis 1
J2 (EXP2) Expansion Connector J2 (EXP) connector on the EXIFE-C1 board of the Expansion Chassis 2
J3 CPU Board J22 connector on the CPU-C1
1.7.2.3 Installing the EXIFB-C1 Board
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
Do Not Power on until all installations have been completed.
1. Turn off the system power.
ISSUE 1.0 SL2100
Hardware Manual 2-13