![background image](http://html.mh-extra.com/html/nec/powermate-vp75/powermate-vp75_user-manual_248723116.webp)
Maintenance and Troubleshooting 4-3
Keyboard
When necessary, inspect and clean the inside of the keyboard. Proceed as follows:
1.
Remove the six screws holding the keyboard enclosure together (see Figure Section 4-
1).
NOTE:
The keyboard and cable together are con-
sidered a whole-unit, field-replaceable assembly.
Therefore, disassembly of the keyboard is necessary
only when cleaning the inside.
Figure Section 4-1 Removing the Keyboard Enclosure
2.
Separate the two halves of the enclosure. Clean the enclosure and keys with a damp
cloth. A small, soft-bristle brush may be used to clean between the keys. Do not wet or
dampen the keyboard's printed circuit board (PCB). If the PCB
accidentally gets wet, thoroughly dry it before reattaching the keyboard to the system
unit.
1 of 4
Screws
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...