5-14 Desktop Repair
Optional 5 1/4-Inch Device Removal
Remove an optional 5 1/4-inch device from the 5 1/4-inch device cage per Figure Section 5-13,
and the following steps.
1.
Remove the top cover, front panel, and 3 1/2-inch drive bracket as previously
described.
2.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device cage
(see Figure Section 5-13), including the audio cable connected to the CD-ROM (if in-
stalled).
3.
Remove the four device screws, two from each side of the 5 1/4-inch device cage (see
Figure Section 5-13).
4.
Remove the device from the 5 1/4-inch device cage.
NOTE:
When reinstalling the 5 1/4-inch device,
note that all power cables are keyed to fit only in the
correct position. The red edge of the diskette drive
signal cable is positioned as shown.
Figure Section 5-13 5 1/4-Inch Device Screws
2 of 4
Device Screws
Power Cable
Signal Cable
Audio Cable
Device Cage
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...
