3-12 Options
3.
Install the processor in the socket as follows.
n
Align the processor with the socket (see Figure Section 3-11).
CAUTION:
Incorrect alignment of the
processor in the socket can damage the
processor and system board.
After installing the processor, check that the proces-
sor’s speed and voltage jumpers on the system
board are set correctly for the processor (see Sec-
tion 2, Setup and Operation).
n
Insert the processor in the socket, and swing the lever down to lock the
processor in place.
n
Insert the heat sink clips over the tabs on the socket, and press the heat sink down
until it locks in place.
Figure Section 3-11 Processor Alignment
4.
Set the processor’s speed and voltage jumpers on the system board for the
installed processor (see Section 2, Setup and Operation).
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...
