3-38 Options
4.
Locate the area at the top of the chassis where the hard disk is to be installed (see
Figure Section 3-32).
Figure Section 3-32 Installing Optional 3 1/2-Inch Hard Disk Drive
5.
Hold the hard drive up against the chassis and align the mounting holes in the top of
the hard drive with the mounting holes in the chassis.
6.
Secure the hard drive to the chassis with the four screws provided with the hard drive
kit.
7.
Connect a connector on the power cable and a connector on the signal cable to the
connectors on the hard drive. (See the preceding subsection “Minitower
5 1/4-Inch Hard Disk Drive Cabling” for cabling instructions.)
8.
Install the minitower system cover.
9.
Connect any external peripherals and cables.
10.
Run the Setup program to set the new configuration (see Section 2).
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...