Maintenance and Troubleshooting 4-13
To hang up and log off, follow these steps at the NEC Technologies Bulletin Board:
1.
Press
Enter
(to continue).
2.
Press
G
(command for Good-bye/Hang-up).
3.
Press
Enter
.
Using the BIOS Update Utility
Update the BIOS from the BIOS flash diskette as follows.
1.
Write down the Setup parameters currently set on the system (see Section 2, Setup
and Operation, for Setup information).
2.
Insert the flash diskette in drive A.
3.
Reboot the system.
4.
At the flash upgrade Main Menu, use the arrow keys to select “Install New BIOS” and
press
Enter.
5.
A prompt appears, asking for confirmation to upgrade the BIOS. Press
Enter
to con-
tinue with the flash upgrade and
Cancel
to quit.
6.
At upgrade completion, remove the flash diskette.
A.
Reboot the system, and run Setup. Check and reset parameters, using the copy of
the Setup parameters that were copied earlier in this procedure.
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...