Options 3-29
3.
Locate the power connector coming from the power supply and plug the correct fitting
power cable into the device power connector (see Figure Section 3-24).
Figure Section 3-24 Desktop 5 1/4-Inch Diskette Drive Cables
Desktop 5 1/4-Inch Hard Disk Drive Cabling
Cable the hard disk drive per the following steps.
1.
Locate the IDE hard disk signal cable (connected to the 3 1/2-inch hard disk drive)
and plug the middle connector into the signal connector on the hard disk drive in the 5
1/4-inch slot (see Figure Section 3-25).
NOTE:
When installing the drives, note that all
power and hard disk signal cables are keyed to fit
only in the correct position.
Either of the hard disk drive signal cable connectors may be used for the hard disk
drives. The hard disk drives are configured by jumpers as master (drive C) and slave
(drive D).
Summary of Contents for PowerMate VP75
Page 147: ...Desktop Repair 5 21 ...
Page 173: ...Minitower Repair 6 25 ...