NEC PowerMate SPB-Boston User Manual Download Page 168

Page: 168 / 192

System Specifications B-9

NOTE

Use shielded cable that meets the FCC Class

B requirements to connect any USB device.

IDE Support

Two independent bus mastering PCI IDE interfaces support
PIO Modes 3 and 4, ATA-33 (Ultra DMA/33)and ATAPI
devices.

The BIOS supports Logical Block Addressing (LBA) and
Extended Cylinder Head Sector (ECHS) translation modes.

The IDE device transfer rate and translation mode are
automatically detected.

Super I/O Controller

SMC FDC37C777 Super I/O Controller is an ISA Plug and
Play compatible, multifunction device that provides the
following features:

Two serial ports

One parallel port with ECP and EPP support

Diskette drive controller



82077 compatible



PC-AT and PS/2 Drive Mode support.

Keyboard and mouse controller.

Serial Ports

External 9-pin D-sub serial port connectors

NS16C550-compatible UARTs supporting data
transfers up to 115.2 Kbits per second

Summary of Contents for PowerMate SPB-Boston

































































































































































































Search results

Summary of Contents for PowerMate SPB-Boston

Reviews:

Related manuals for PowerMate SPB-Boston

Brands by name

Popular brands

NEC PowerMate SPB-Boston, User Manual

Search results

Summary of Contents for PowerMate SPB-Boston

Reviews:

Related manuals for PowerMate SPB-Boston

Brands by name

Popular brands