NEC PowerMate SPB-Boston User Manual Download Page 119

Page: 119 / 192

Installing Options 5-37

After securing your system, reboot it and run the Setup
program to set the new configuration.

EXTERNAL OPTIONS

This subsection includes installation procedures for the
following external options:

parallel printer

serial devices

Connecting a Parallel Printer

NOTE

Before connecting a printer to the system, be

sure the printer is set up correctly. Follow the setup
instructions that came with the printer.

Connect a parallel printer to the system as follows.

Turn off power to the system and printer.

Connect the printer cable to the printer port on the rear
of the system unit (see the following figure).

Secure the cable with the screws provided.

Summary of Contents for PowerMate SPB-Boston

































































































































































































Search results

Summary of Contents for PowerMate SPB-Boston

Reviews:

Related manuals for PowerMate SPB-Boston

Brands by name

Popular brands

NEC PowerMate SPB-Boston, User Manual

Search results

Summary of Contents for PowerMate SPB-Boston

Reviews:

Related manuals for PowerMate SPB-Boston

Brands by name

Popular brands