System BIOS and Utilities 4-23
Scan User Flash Area
This option configures the BIOS to scan the flash
memory for user binary files that are executed at boot
time. The choices are “Enabled” and “Disabled”
(default).
After Power Failure
This option specifies whether or not to restore power to
the system if it is turned on and there is a power failure.
The options are “Stay Off” which keeps the power off,
“Power On” which restores the system’s power, and
“Last State” which restores the previous power state.
On Modem Ring
This option specifies how the system responds when
power is off and the modem detects an incoming call.
The options are “Stay Off” and “Power On” (default).
On LAN
This option controls how the system responds to a LAN
wake-up call when power is off. The options are “Stay
Off” and “Power On” (default).
On PME
This option controls how the system responds to a PCI
power management enable event when power is off. The
options are “Stay Off” and “Power On” (default).
First/Second/Third/Fourth Boot Device
You can select the sequence of boot devices by type.
Pressing your keyboard’s + (plus) or – (minus) keys
allows you to select the order. For maximum system
accessibility, Removable Device should always be set as
the First Boot Device.
