5-32 Installing Options
!
CAUTION
Before picking up the processor cartridge, reduce
static discharge by touching the metal chassis of
the system unit.
2.
Align the cartridge with the guides in the retention
mechanism (see the following figure). The cooling fan
faces the rear of the chassis.
3.
Insert the cartridge into the retention mechanism and
evenly press down on the cartridge until it is fully seated
in the Slot 1 connector.
4.
Align the retaining bar with the top of the cartridge and
evenly press down on the bar until it snaps in place on the
cartridge (see the following figure).
Installing the Celeron or Pentium III processor cartridge
A – Retaining Bar
C – Retention Mechanism
B – Processor Cartridge
D – Slot 1 Connector
