Configuring the System 3-25
Note:
Some older software may not work in
a Windows 95 or Windows 98 system configured
for FAT 32. In addition, select FAT16 if a dual-
boot system (with Windows 95 or Windows 98
and Windows NT 4.0) is desired.
4.
A FAT 16 or FAT 32 Partition warning screen appears
indicating that the system is about to partition and format
your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
5.
Click
Continue
. The following steps should take place.
system performs FDISK
system reboots
partitions are formatted
OS and drivers load from the CD
The “Operating System Restore Completed” screen
appears when all files have been restored.
6.
Remove the CD from the CD tray.
7.
Click
OK
to reboot.
This completes the Auto Rebuild and Restore procedure.
See “NEC Application and Driver CD” for instructions on
installing any of the applications or online documents, or to
install device drivers that did not come with your system.
Restore any application or driver that was not provided by
NEC by using the vendor diskette(s) or CD-ROM(s) included
in its original packaging.
