2-2 Setting Up the System
This chapter provides the information you need to set up and
use the PowerMate ES 5200 small desktop, desktop, and
minitower computers. Some of the information provided
includes cable connections, system startup procedures,
system shutdown procedures, and system care. The chapter
also provides a matrix showing where to find additional
information about your system.
Cable Connections
In this section find guidelines on setting up your system.
Connect the system components as follows:
!
WARNING
In minitower systems, turn the feet out before
connecting any of the cables or powering on the
system.
See the Quick Setup poster for diagrams showing most
cable connections.
Use the icons on the rear of the system unit to identify
connectors.
If the system comes with a fax/modem board, connect it to
the telephone line as follows:
Unplug the telephone from the wall jack.
Plug the telephone cable that comes with the system
into the line jack on the system and into the telephone
jack on the wall.
Plug the cable on the telephone into the phone jack on
the system.
