NEC POWERMATE ES 5200 - SERVICE Manual Download Page 71

Page: 71 / 276

Configuring the System 3-23

Welcome screen

Click

Continue

to continue (or

Exit

to exit the program).

A License Agreement screen appears with three options:
Back, Reject, and Accept.

Read the license agreement and click

Accept

to continue.

The Restore Mode screen appears with four options:
Back, Auto, Custom, and Fix OS.

See one of the following sections to continue with the restore.

“Auto Rebuild and Restore”

“Custom Rebuild and Restore”

“Fixing the Operating System”

Summary of Contents for POWERMATE ES 5200 - SERVICE





















































































































































































































































































Search results

Summary of Contents for POWERMATE ES 5200 - SERVICE

Reviews:

Related manuals for POWERMATE ES 5200 - SERVICE

Brands by name

Popular brands

NEC POWERMATE ES 5200 - SERVICE, Manual

Search results

Summary of Contents for POWERMATE ES 5200 - SERVICE

Reviews:

Related manuals for POWERMATE ES 5200 - SERVICE

Brands by name

Popular brands