NEC N8100-1573F, User Manual

Page: 344 / 394

E-8 Installing Windows Server 2003 x64 Editions
7.
Select the [Intel(R) ICH9R/DO/DH SATA AHCI Controller] and press Enter .
The screen of Step 5 is displayed.
– If the N8103-109/116/117 is used:
Press S .
The screen of Step 6 is displayed. Press Enter , and go to Step 8.
– If the N8103-109/116/117 is not used:
Press Enter , and go to Step 9.
8.
Select the proper RAID Controller and press Enter .
– [LSI Embedded MegaRAID (Windows XP/2003 64-bit)]
(When Onboard RAID Controller (LSI Embbede MegaRAID

) is used.)
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 for x64)]
(When N8103-116/117 RAID Controller is installed.)
– [Promise SuperTrak EX Family Controller - 64bits platform]
(When N8103-109 RAID Controller is installed.)
The screen of Step 5 is displayed.
Press Enter , and go to Step 9.
9.
When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT:
If you install Windows Server 2003 x64 Editions on
the hard disk larger than 2,097,152MB (2TB), you can specify only a
value equal to or less than 2,097,152MB as partition size.
10.
When the installation of Windows Server 2003 x64 Edition has finished, the system
reboots automatically.