NEC N8100-1573F, User Manual

Page: 234 / 394

8-12 Troubleshooting
Error Messages on Virtual LCD
NEC EXPRESSSCOPE Engine 2 (Remote Management Controller) on your server board allows
you to monitor the server status on the WEB browser.
The virtual LCD (16 digits x 2 lines) in the "Host Information" area displays the POST codes and
status message. When POST detects an error, the POST error code is displayed on the virtual LCD
upon completion of POST. See the table for POST error codes for details.
POWER ON
ATTENTION
Virtual LCD
Status indicators
Message send from BIOS
Message send from BMC
Example:
Messages displayed on upper line (BIOS message)
On-screen message Description Action
XX BIOS Rev XXXX POST in progress. Wait until POST completes.
Prepare To Boot POST completes normally. Wait until boot-up completes.
Mem Reconfigured POST completes with memory degraded. Contact your service
representative.
Mem Err Disable A correctable memory error frequently
occurred.
CPU Reconfigured POST completes with processor
degraded.
Memory C-Err XX A correctable error frequently occurs in
DIMM #XX.
Memory U-Err XX An uncorrectable error has occurred in
DIMM #XX.
PCI Bus SERR XX A SERR has occurred in the PCI bus XX.
PCI Bus PERR XX A PERR has occurred in the PCI bus XX.
Chipset Err XXXX A chipset error occurred.