NEC N8100-1573F, User Manual

Page: 95 / 394

Configuring Your Server 4-19
Option Parameter Description Your Setting
AC-LINK Stay Off
[Last State]
Power On Specify the state of power when the
AC power to the server is turn off
once and then on. See the table
below for details.
Power ON Delay
Time (Sec) [20] - 255 Specify the power on delay time
within the range between 20 and
255 seconds. The time specified is
valid when "Power On" or "Last
State" is specified for AC LINK.
Platform Event
Filtering Disabled
[Enabled] Specify whether to enable or disable
the platform event filtering (PEF)
feature.
[ ]: Factory-set
The table below shows the operation when the AC power to the server is turned off once and then
on again, depending on the setting of "AC LINK".
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.
IMPORTANT:
To power on the server from the UPS (Uninterruptible
Power Supply), select [Server] - [AC LINK] - [Power On].