NEC N8100-1422F, User Manual

Page: 127 / 414

Configuring Your Server 4-59
Default settings and their explanation
Item Default Description Change
Battery Backup Present
None Displays Properties.
•
When battery is installed: Present
•
When battery is not installed: None
–
Set Factory Defaults [No]
Yes Restores vendor's factory defaults. Prohibited *1
Cluster Mode Disabled – Prohibited
Rebuild Rate 30 Recommended value: 30 Permitted
Patrol Read Rate 30 Recommended value: 30 Permitted
BGI Rate 30 Recommended value: 30 Permitted
CC Rate 30 Recommended value: 30 Permitted
Reconstruction Rate 30 Recommended value: 30 Permitted
Adapter BIOS [Enabled]
Disabled – Prohibited
Coercion Mode [None]
128MB-way
1GB-way – Prohibited
PDF Interval 300 – Prohibited
Alarm Control [Disabled]
Enabled
Silence Disabled: Does not issue an alarm. Prohibited *2
Cache Flush Interval 4 – Prohibited
Spinup Drive Count 2 – Prohibited
Spinup Delay 12 – Prohibited
StopOnError [Disabled]
Enabled – Prohibited
Stop CC On Error [No]
Yes Specify the operation at error detection in
Consistency Check.
No: Recover and resume.
Yes: Abort Permitted
Maintain PD Fail
History [Disabled]
Enabled – Prohibited
Schdule CC Supported Set the scheduled consistency check. Permitted
*1 Do not perform "Set Factory Defaults". If performed, the NEC's factory-set value will no longer
be restored.