![background image](http://html.mh-extra.com/html/nec/mpd780851/mpd780851_preliminary-users-manual_249266160.webp)
160
CHAPTER 12 A/D CONVERTER
Preliminary User’s Manual U14581EJ3V0UM00
12.4 A/D Converter Operations
12.4.1 Basic operations of A/D converter
<1> Select one channel for A/D conversion with the analog input channel specification register (ADS1).
<2> The voltage input to the selected analog input channel is sampled by the sample & hold circuit.
<3> When sampling has been done for a certain time, the sample & hold circuit is placed in the hold state and the
input analog voltage is held until the A/D conversion operation is ended.
<4> Set bit 7 of the successive approximation register (SAR) so that the tap selector sets the series resistor string
voltage tap to (1/2) AV
REF
.
<5> The voltage difference between the series resistor string voltage tap and analog input is compared with the
voltage comparator. If the analog input is greater than (1/2) AV
REF
, the MSB of SAR remains set. If the analog
input is smaller than (1/2) AV
REF
, the MSB is reset.
<6> Next, bit 6 of SAR is automatically set, and the operation proceeds to the next comparison. The series resistor
string voltage tap is selected according to the preset value of bit 7, as described below.
•
Bit 7 = 1: (3/4) AV
REF
•
Bit 7 = 0: (1/4) AV
REF
The voltage tap and analog input voltage are compared and bit 6 of SAR is manipulated as follows.
•
Analog input voltage
≥
Voltage tap: Bit 6 = 1
•
Analog input voltage < Voltage tap: Bit 6 = 0
<7> Comparison is continued in this way up to bit 0 of SAR.
<8> Upon completion of the comparison of 8 bits, an effective digital result value remains in SAR, and the result
value is transferred to and latched in the A/D conversion result register (ADCR1).
At the same time, the A/D conversion end interrupt request (INTAD) can also be generated.
The occurrence of INTAD can be controlled by setting bit 6 (PFCM) of the power-fail compare mode register
(PFM).
Caution
The first A/D conversion value is undefined immediately after an A/D conversion operation
has been started.
Summary of Contents for mPD780851
