NEC MC2200, User Manual

Page: 30 / 142

2-4 Setting Up the System
Static Precautions
An electrostatic discharge (ESD) can damage disk drives, option boards, and other
components. You can provide some ESD protection by wearing an antistatic wrist strap
attached to chassis ground when handling system components.
Electronic devices can be easily damaged by static electricity. To prevent damage, keep
them in their protective packaging when they are not installed in your system.
Assembly
This section describes how to assemble your rack-mount server unit into a standard EIA
19 inch rack cabinet.
!
CAUTION
Ensure that the location of the rack-mount server unit does not
create an unstable condition when installed in the rack cabinet.
1.
Select an appropriate location in your rack cabinet for the rack-mount server unit.
To improve rack stability, mount heavier items towards the bottom of the rack
cabinet.
Note:
When planning your system configuration for the rack
cabinet you should consider the length of the cables that
interconnect system components.
2.
Locate the two support brackets (D). Using four self tapping screws (E) supplied
with the rack cabinet for each support bracket, attach the two support brackets to the
vertical mounting rails (A and B) of the rack cabinet.
3.
Install the four caged nuts (C) that secure the front of the rack-mount server unit to
the rack cabinet. Position the caged nuts to align with the screw holes in the front
bezel of the rack-mount server unit.
Note:
The caged nuts are secured into the vertical mounting
rails of the rack cabinet by inserting one side of the nut into the slot
and squeeze while pressing the opposite side until it snaps into
place.