NEC MC2200, User Manual

Page: 52 / 142

3-10 Configuring Your System
MENU PARAMETER NAME NORMAL
SETTING OR
DISPLAY ONLY
YOUR CONFIGURATION
*Serial Port 2
2F8, IRQ 3
*Parallel Port 378, IRQ 7
Parallel Mode Bi-directional
Diskette Controller Enabled
IDE Adapter Enabled
Mouse Enabled
Memory Reconfiguration
Press ENTER for menu.
Memory Reconfiguration Enabled
DIMM J20 – Row #1 Status Normal
Row #2 Status None
DIMM J19 – Row #3 Status None
Row #4 Status None
DIMM J18 – Row #5 Status None
Row #6 Status None
DIMM J17 – Row #7 Status None
Row #8 Status None
Memory Row Errors Clear Press ENTER
Memory Configuration Message Enabled
Memory Warning POST Error Enabled
CPU Reconfiguration
Press ENTER for menu.
CPU Reconfigure Enabled
CPU #1 Status Normal
CPU #2 Status None
Clear CPU Errors Press ENTER
CPU Error Pause Enable
**SMB Configuration
Press ENTER for menu.
ITF Monitoring Observation OptROM – END
Boot Monitoring Disabled
Boot Monitoring timeout period 5
Advanced Chipset Control
Press ENTER for menu.
DRAM Speed 60ns
DMA Aliasing Enabled
8-bit I/O Recovery 4.5
16 bit I/O Recovery 4.5
Use Mutiprocessor Specification
1.4
Plug & Play O/S
No