NEC MC2200, User Manual

Page: 29 / 142

Setting Up the System 2-3
Unpacking the System
!
WARNING
Your system weighs approximately 65 pounds (29.25 kg). If your
system contains numerous optional boards and peripheral devices, it
will weigh more. To avoid personal injury, make sure you have
someone help you lift or move the system.
When you receive your system, inspect the shipping containers prior to unpacking. If
the shipping boxes are damaged, note the damage, and if possible, photograph it for
reference. After removing the contents of the containers, keep the cartons and the
packing materials. If the contents appear damaged when you unpack the boxes, file a
damage claim with the carrier immediately.
Rack-Mount Subsystem Assembly
This section provides the instructions for assembling the rack-mount server unit into a
standard EIA 19-inch rack cabinet.
Before You Begin
Before you begin, please review the following cautions, warnings, and general
guidelines.
!
WARNING
Be sure that power to the system is turned off and unplugged. All
voltage is removed only when the power cords are unplugged.
„
Avoid excessive vibration and shock. Dropping an electronic component can cause
serious damage.
„
Do not disconnect or remove parts other than those specified in the procedure.
„
Do not touch I/O connector pins.
„
All screws are phillips-head, unless otherwise specified.
„
On completion of any assembly or reassembly, perform a power-on test. If a fault
occurs, verify that the assembly or reassembly was performed correctly. If the
problem persists, see Chapter 5, Problem Solving".