5. Installing Optional Devices
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
129
Chapter 2 Configuring and Upgrading the System
10. Attach the air duct, cable, and cable clamp.
11. Place the top cover of the CPU/IO module and secure it with three screws.
12. See
Chapter 2 (5.4.2 Installing CPU/IO Module)
and install the CPU/IO module.
13. Connect the power cords.
14. Press the POWER switch to power on the server.
15. Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list in
Chapter 1 (6.2
POST Error Message)
.
5.5.3
Replacing DIMM
Follow the procedure below to replace a failed DIMM.
1. Identify the failed DIMM by viewing the memory slot error LED.
2. Remove the CPU/IO module according to
Chapter 2 (5.4.1 Removing CPU/IO Module)
.
3. Replace the DIMM.
4. See
Chapter 2 (5.4.2 Installing CPU/IO Module)
and install the CPU/IO module.
5. Start up the CPU/IO module using NEC ESMPRO Manager or ft server utility.
SAS1
SAS2