5. Checking the Duplicating Operation of Modules
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
47
Chapter 1 Maintenance
2. Start ft Server Utility.
# /opt/nec/esmpro_sa/bin/ESMftcutil
3. Select
CPU Module
then the CPU module to stop (*) from the
ft server
tree.
–
Select
CPU module (ID:0)
to stop CPU/IO module 0.
–
Select
CPU module (ID:1)
to stop CPU/IO module 1.
4. Select
Stop
of
Start/Stop
.
When you stop the operation of a CPU module, the indications of the status LEDs change as follows.
Below denotes that the only one CPU module is operating.
Indications of status LEDs
LED
CPU/IO module 0 (Stopped)*
CPU/IO module 1 (Operating)
1 PRIMARY LED
On (Green)
–
2 DISK ACCESS LED
Blinking (Green)
(Lights green when accessing the
disk drive)
Blinking (Green)
(Lights green when accessing the
disk drive)
LED
System
3 System FT LED
–
* As an example, the indications of when CPU/IO module 0 is stopped are shown.
