4. Maintenance of the Server
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
28
Chapter 1 Maintenance
4.1.2
Procedure in NEC ESMPRO Manager
Perform the procedure below to start component.
1. Select
General
screen of the target component under the
ft System
tree in
Information of server
state/constitution
.
2. Check that the current status of the target component is available. The status is shown on Status
Information display of
General
screen.
3. Select
Maintenance
screen and click the
Execute
button of
Bring Up
operation.
Tips
•
The target component starts after a while.
•
The start result can be verified by "
State
" in the
General
screen of target component.
The result of the start operation is reported by the server as an alert.
Perform the procedure below to stop the component.
1. Select
General
screen of the target component under the
ft System
tree in
Information of server
state/constitution
.
2. Check that the current status of the target component is available. The status is shown on Status
Information display of
General
screen.
3. Select
Maintenance
screen and click the
Execute
button of
Bring Down
operation.
Tips
•
The target component stops after a while.
•
The stop result can be verified by "
State
" in the
General
screen of target component.
The result of the stop operation is reported by the server as an alert.
Sample screen of NEC ESMPRO Manager
Maintenance screen of CPU Module
