NEC Express5800/R320c-E4 Maintenance Manual Download

Page: 7 / 191

Notations Used in This Document

Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)

Notations Used in This Document

Notations used in the text

In addition to safety-related symbols urging caution, three other types of notations are used in this document.

These notations have the following meanings.

Important

Indicates critical items that must be followed when handling the hardware or operating

software. If the procedures described are not followed,

hardware failure, data loss, or other

serious malfunctions could occur

Note

Indicates items that must be confirmed when handling the hardware or operating software.

Tips

Indicates information that is helpful to keep in mind when using this server.

Optical disk drive

This server is equipped with one of the following drives. These drives are referred to as

optical disk drive

in this

document.

•

DVD-ROM drive



•

DVD Super MULTI drive



Removable media

Unless otherwise stated,

removable media

described in this document refers to both of the following.

•

USB flash drive



•

Flash FDD



Summary of Contents for Express5800/R320c-E4
































































































































































































Search results

Summary of Contents for Express5800/R320c-E4

Reviews:

Related manuals for Express5800/R320c-E4

Brands by name

Popular brands

NEC Express5800/R320c-E4, Maintenance Manual

Search results

Summary of Contents for Express5800/R320c-E4

Reviews:

Related manuals for Express5800/R320c-E4

Brands by name

Popular brands