3. Duplex LAN Configuration
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
145
Chapter 2 Configuring and Upgrading the System
3.1.3
Configuring Duplex LAN
The following explains how to configure duplex/dual LAN.
Important If configuring a duplex network, make sure that the CPU/IO module is set to duplex.
If the CPU/IO module is in simplex status, the team properties of NIC teaming cannot
be opened.
Make sure to configure the duplex network according to the following procedure
while the CPU/IO module is in duplex status.
Note
Because the configuration from the remote site may fail, you need to log on as an
Administrator or a member of Administrators group.
Before replacing the back panel of CPU I/O module, 1000BASE-T 2ch board set
(N8804-012), or 10GBASE-T 1ch board set (N8804-011), be sure to remove duplex
LAN, and create a team after the replacement.
See
Chapter 2 (3.2.4 Removing Duplex LAN)
for how to remove duplex LAN.
See
Chapter 2 (3.2.3 Configuring Duplex LAN)
for how to configure duplex LAN.
The screen images are subject to change because of the network driver version.
Substitute as appropriate when content has been modified.
(1)
Start Server Manager.
Select
Start
–
Server Manager
.
(2)
Create team adapter.
1. Select
Local Server
.
Summary of Contents for Express5800/R310e-E4
Page 267: ...MEMO...
