NEC Express5800/R310e-E4, Maintenance Manual

Page: 243 / 268

2. BMC Configuration
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
243
Chapter 3 Useful Features
Item Description Default Value
IPv6 Property
IPv6 Enable or disable IPv6.
*2
Disable
Address Assignment
Mode
Specify the mode to assign IPv6 address (Static or Dynamic).
*2 *7
Dynamic
Link Local Address Display link local address.
*7 *8
－
Global Address Display IPv6 address when Dynamic is specified for assignment
mode.
*7 *9
::
Static Address Specify IPv6 address when Static is specified for assignment mode.
*7 *10
0::0
Prefix Length Specify the prefix length when Static is specified for assignment
mode.
*2 *7
64
Gateway Address Specify the gateway address when Static is specified for
assignment mode.
*2 *7
0:00
Access Limitation
Limitation Type Select the Access Limitation Type.
Allow All
: Access to BMC is not limited.
Allow Address
: Specify the IP Address that is allowed to access BMC.
Deny Address
: Specify the IP Address that denies accessing BMC. Allow All
IP Address Specify the IP Address to allow or deny to access with BMC.
*11 *12
Blank
Service
HTTP Enable or disable HTTP service.
*13
Enable
HTTP Port Number Specify the HTTP port number.
*14
80
HTTPS Enable or disable HTTPS service. *13 Enable
HTTPS Port Number Specify the HTTPS port number.
*14
443
SSH Enable or disable SSH service. Enable
SSH Port Number Specify the SSH port number. *14 22
*1: If an illegal value is specified for subnet mask, an error message is displayed and setting is disabled.
*2: It should be same settings for CPU/IO module 0 and CPU/IO module 1. When the settings is different, the
settings of primary module is preferentially. In addition, this rule is applied to the BMC Configuration for
Windows.
*3: Can be changed only when DHCP is set to "Disable".
*4: Can be changed only when DHCP is set to "Enable".
*5: Host Name should be within 63 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*6: Host Name and Domain Name should be within total of 255 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*7: Can be specified only when IPv6 is set to "Enable".
*8: When you need to know the Link Local Address, first set IPv6 to "Enable", redisplay this screen. Then Link
Local Address configured automatically appear, be sure to use this address.
*9: Displayed only when "Dynamic" is specified for Address Assignment Mode.
*10: Cannot set the Static Address whose start is "fe8".
*11: Can be specified when Access Limitation Type is "Allowed Address" or "Deny Address". The length must not
exceed 255 characters.
*12: The range of IP addresses to "Allow" or "Deny" access is delimited by ", (Comma)". With regard to the setting
of “Deny” access, "*(Asterisk)" can be described as a wild-card. (ex: 192.168.1.*,192.168.2.1,192.168.2.254)