NEC Express5800/120Rd-2 Service Manual Download Page 4 | Manualshive

Page: 4 / 362

NEC Express5800/120Rd-2 Service Manual Download Page 4

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.
and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights
to this document, including all design, manufacturing, reproduction, use, and sales rights
thereto, except to the extent said rights are expressly granted to others.

The NEC Computers Inc. product(s) discussed in this document are warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each such product is dependent upon factors such as
system configuration, customer data, and operator control. Since implementation by
customers of each product may vary, the suitability of specific product configurations and
applications must be determined by the customer and is not warranted by NEC Computers
Inc.

To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Computers Inc. is prohibited.

Trademarks

AcceleRAID 160 and AcceleRAID 352 are trademarks of Mylex Corporation
MS-DOS is a registered trademark of Microsoft Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
Windows NT is a trademark of Microsoft Corporation.
Windows 2000 is a registered trademark of Microsoft Corporation.
SCO UNIX is a registered trademark of Caldera Systems, Inc.
SCO OpenServer is a trademark of Caldera Systems, Inc.
Adaptec is a registered trademark of Adaptec, Inc.
UnixWare is a registered trademark of Caldera Systems, Inc..
Pentium III is a registered trademark of Intel Corporation.
All other product, brand, or trade names used in this publication are the trademarks or registered

trademarks of their respective trademark owners.

PN: 456-01583-000

January 2002

Copyright 2002

NEC Computers Inc.

15 Business Park Way

Sacramento, CA 95828

All Rights Reserved

«
...
2
3
4
5
6
...
»

Summary of Contents for Express5800/120Rd-2











































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands