NEC Express5800/120Rd-2, Service Manual

Page: 107 / 362

Configuring Your System 3-17
Memory Configuration
Select "Memory Configuration" on the Advanced menu to display the following screen.
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Extended Memory
Test 1 MB
1 KB
Every-Location
[Disabled]
Extended memory test options run during
POST.
1 MB: Tests every 1 -MB memory.
1 KB: Tests every 1 -KB memory.
Every-Location: Tests every memory
location.
Disabled: Initializes memory.
Note: the smaller the test unit, the longer
the test takes during POST.
DIMM Bank # 1 -
#3
Installed
Disabled
Not Installed Indicates the current memory status.
"Normal" indicates the normal status,
"Error" indicates a memory error, and
"None" indicates no DIMM installed (view
only).
Bank #
1 indicates DIMMs in DIMM socket
# 1 A and # 1 B.
Bank #2 indicates DIMMs in DIMM Bank
#2A and #2B.
Bank #3 indicates DIMMs in DIMM Bank
#3A and #3B.
(Memory is interleaved and two DIMMs
are used in pair.)
Memory Retest [Disabled]
Enabled Clears memory error information and
retests all DIMMs on the next system
boot. This option will be automatically
reset to [Disabled] on the next system
boot.
[ ]: Factory-set