Installing the Operating System with Express Setup 5-5
Windows Server 2003
Express Setup can install Windows Server 2003 operating system. However, note the following
issue:
IMPORTANT:
Before starting the installation, complete all the process of adding
the optional device and the setup of Express server mainframe
(BIOS and optional board specification)
The document for installing Windows Server 2003 is also attached
to the other software package which is sold separately from NEC,
but refer to this document when you install Windows Server 2003
on this model.
After completing Express Setup, see "Setup for Solving Problems"
described later to specify the settings for trouble recovery such as
"Specifying Memory Dump".
Installing on the Mirrored Volume
If you want to install Windows Server 2003 on the volume that is mirrored using "Disk
Management", invalid the mirroring before operating the installation to set back to the basic disk,
and valid the mirroring again after the installation has completed.
Creating, invalid, delete mirror volume can be operated from "Disk Management" in "Computer
Management".
Connecting MO Device
If you operate installing Windows Server 2003 with MO device connected, the installation may not
be completed normally. In such case, detach MO device and then re-install the system from the
beginning.
Connecting Hard Disk Drive
Connect the hard disk drive that OS is not going to be installed after installing OS.
If you create multiple logical drives in your system, refer to "Re-installing the operation system
when multiple logical drives exist" (Appendix D).
Summary of Contents for Express5800 120Lh
