NEC Express5800 120Lh, User Manual, Page: 102 / 314

5-10 Installing the Operating System with Express Setup
IMPORTANT:
„
Reserve the partition to install the OS more than the minimally
required size.
„
If you select "Use Existing Array" at "New/Existing RAID
Configuration", the information included in the first partition
(excluding maintenance partition) will all be formatted and deleted.
The information included in the other partition will be retained.
In the figure below, describes the partition which information will
be deleted when maintenance partition exists.
First Partition
<Maintenance Partition>
Retained
Second
Partition
Deleted
Third
Partition
Retained
Fourth
Partition
Retained
„
You can not re-install the system with the existing partition that is
upgraded to Dynamic Disk remained. Do not select "Use
Existing Array" at "New/Existing RAID Configuration".
„
If "Create New Partition" at "New/Existing RAID Configuration"
is selected, do not specify the value for the partition more than
120GB.
„
If you specify other than 4095MB for the "Installing Partition", it
is necessary to convert to NTFS.
„
If "Use Existing Array" at "New/Existing RAID Configuration" is
selected but the partition other than the one to install Windows
Server 2003 does not exist (excluding maintenance partition),
Express Setup will reserve the maximum area of the hard disk to
install Windows Server 2003.
„
You can not go to the next screen if the specification is incorrect.
„
On specification, an error may occur in relationship with the
specified contents of the former screen and require to go back to
modify the specification.
„
During the setup, the screen to specify the partition that Windows
Server 2003 is to be installed appears. The first 55MB area
displayed on the screen is a partition that is used to store the
configuration information or utilities unique of the server. We do
not recommend to delete this area, but if you do not want to
reserve this 55MB area, perform the installation by manual setup.
It is unable to delete this area by Express Setup.
„
If you specify other than 120GB for the actual area, you may not
create the partition specified as the entire area in sizes more than
120GB.