General Description 2-17
USING NEC EXPRESS SERVER
This section describes basic operations of your server including how to use devices such as the
floppy disk drive and the CD-ROM drive. See Appendix B for notes on using the floppy disk, CD-
ROM, and accessories including the keyboard and the mouse.
Front Door
Open the front door to power on/off the server, to access the floppy disk drive, CD-ROM drive, and
5.25-inch devices, and to install/remove hard disks to the 3.5-inch device bays.
1
2
IMPORTANT:
To open the front door, you must unlock the door with
the provided security key.
Insert the provided security key into the key hole and turn the key to unlock the front door. Then,
hold the front door edges and gently pull the door away from the computer chassis. When you
close the front door, lock the door with the key for security.
IMPORTANT:
Do not open the front door by hanging the handle at
the upper left corner with your claws. If the front door cannot be
opened easily, hold the upper left and lower left corners of the front
door with your hands and then pull it out toward you.
Lock
Unlock
Summary of Contents for Express5800 120Lh
