NEC Express5800 120Lh, User Manual, Page: 106 / 314

5-14 Installing the Operating System with Express Setup
NOTE: We recommend you to add [Network Monitor] at
[AddingServices]. [Network Monitor] can monitor the frame (or the
packet)that the computer installing [Network Monitor] sends or
receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving
Problems" described later in this chapter.
Optional Network Board Driver
If you want to utilize optional Network Board (N8104-84/103/113), the network driver will be
installed automatically. Therefore, the driver attached to the Network board should not be used.
If you want to utilize optional Network Board (N8104-86/111), install the driver stored in NEC
EXPRESSBUILDER CD-ROM.
In case of utilizing (N8104-86/111)
"CD-ROM Drive Letter:\WINNT\DOTNET\BC3\PRO100\WS03XP32"
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
IMPORTANT: If you want to utilize optional Network Board
"N8104-103", open the [Advanced] in PROSet window and change
the [Offload TCP Segmentation] value to "Off".