manualshive.com logo in svg

NEC Express5800/110Ge, User Manual, Page: 56 / 332

Share
Download
NEC Express5800/110Ge User Manual Download Page 56

3-8  Setting Up Your Server

CONNECTING POWER CORD

Connect the provided power cord to the server.

WARNING

Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-3
to 1-8 for details.

■

 

Do not hold the power plug with a wet hand.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.

■

 

Do not plug the power cord in to an improper power source.

■

 

Do not connect the power cord to an outlet that has an illegal number of
connections.

■

 

Insert the power plug into the outlet as far as it goes.

■

 

Use the authorized power cord only.

 

1. 

Plug the provided power cord into the power receptacle on the rear of the server.

 

2. 

Plug the other end of the power cord into the wall outlet.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Reviews:

No comments