manualshive.com logo in svg

NEC Express5800/110Ge, User Manual, Page: 21 / 332

Share
Download
NEC Express5800/110Ge User Manual Download Page 21

Notes on Using Your Server    1-7

During Operation

CAUTION

Stay away from the fan.

Keep your hand or hair away from the cooling fan on the rear of the server.
Failure to follow this warning may get your hand or hair caught in the fan,
resulting in injury.

Avoid contact with the server during thunderstorms.

Disconnect the power plug from the outlet when a thunderstorm is approaching.
If it starts thundering before you disconnect the power plug, do not touch any
part of the server including the cables. Failure to follow this warning may cause
a fire or an electric shock.

Keep animals away from the server.

Failure to follow this warning may cause a fire or an electric shock.

Do not leave the CD tray open.

If dust gets on the lens of optical disk drive, the drive may have problems
reading your disks.
Also, the CD tray may be broken by contacting any objects.

Take off the headset before connection.

To protect your ears, take off the headset before connecting it to the headset
jack. Make sure that the volume is not extremely turned up before connection.

Do not place any object on top of the server.

The server may fall and cause property damage to the surroundings.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Reviews:

No comments