NEC Express5800/110Ge User Manual Download Page 134

Page: 134 / 332

5-20 Installing the Operating System with Express Setup

Follow the procedure below to install PROSet.

Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.

If the autorun menu is displayed, close menu screen.

The [Windows Explorer] dialog starts.

* The procedure in the case of the standard start menu

Click Start menu and click [Windows Explorer].

* The procedure in the case of the classic start menu

Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].

Run "dxsetup.exe" in the following directory.

\006\win\winnt\dotnet\dl3\proset\win32

The [Intel(R) PROSet - InstallShield Wizard] dialog starts.

Click [Next].

Choose "I accept the terms in the license agreement" and click [Next].

Click [Next].

Choose "I accept the terms in the license agreement" and click [Next].

Click [Install].

When [InstallShield Wizard Completed] window is displayed, click [Finished].

10.

Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart the
system.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Search results

Summary of Contents for Express5800/110Ge

Reviews:

NEC Express5800/110Ge, User Manual, Page: 134 / 332

Search results

Summary of Contents for Express5800/110Ge

Reviews: