NEC Express5800/110Ge User Manual Download Page 120

Page: 120 / 332

5-6 Installing the Operating System with Express Setup

Mounting MO Device

Do not mount an MO device on this computer during the Windows installation.

About Removable Media

Do not set removable media, such as DAT, into the device mounted on this computer during the
Windows installation.

Connecting Hard Disk Drive

Do not connect the other hard disk drives except the drive that you want to create the Windows
system drive.

If you create multiple logical drives in your system, see "Re-installing the Operating system when
multiple logical drive exist" (Appendix E).

Re-installing to the hard disk drive which has been upgraded to Dynamic Disk

You cannot re-install Windows Server 2003 with the current partition of the hard disk drive
upgraded to Dynamic Disk kept remained.

If you want to keep the current partition remained, see Appendix E to re-install the system.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Search results

Summary of Contents for Express5800/110Ge

Reviews:

NEC Express5800/110Ge, User Manual, Page: 120 / 332

Search results

Summary of Contents for Express5800/110Ge

Reviews: