NEC Express5800/110Ge User Manual Download Page 110

Page: 110 / 332

4-50 Configuring Your Server

Check Consistency

Run LSI Software RAID Configuration Utility

Perform Check Consistency

Exit LSI Software RAID Configuration Utility

Run LSI Software RAID Configuration Utility.

Select "Check Consistency" from the TOP menu.

The "Virtual Drives" screen appears.

Move the cursor onto the virtual drive to be checked, and press

Space

to select it.

When virtual drive has been selected, press

F10

to start consistency check.

A confirmation screen for execution appears. Select "Yes".

The consistency check starts.

When the progress bar in the "Check Consistency Progress" screen indicates 100%, the
consistency check is completed.

Press

Esc

to return to the TOP menu and exit LSI Software RAID Configuration Utility.

IMPORTANT:

Be sure to execute Check Consistency after creating configuration.

Be sure to execute Consistency Check if you have configured the
RAID drives by Express Setup.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Search results

Summary of Contents for Express5800/110Ge

Reviews:

NEC Express5800/110Ge, User Manual, Page: 110 / 332

Search results

Summary of Contents for Express5800/110Ge

Reviews: