manualshive.com logo in svg

NEC Express5800/110Ge, User Manual, Page: 215 / 332

Share
Download
NEC Express5800/110Ge User Manual Download Page 215

Upgrading Your Server  9-5

INSTALLATION OR REMOVAL PROCEDURE

Install or remove a component from the server in the following procedure.

Left Side Cover

The left side cover should be removed to access to built-in devices and/or mother board in the server.
It is not necessary to remove the right side cover.

Removal

Remove the left side cover in the following procedure.

WARNING

Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-3
to 1-8 for details.

■

 

Disconnect the power plug before working with the server.

 

1. 

See the section "Preparing for Installation and Removal" described earlier to prepare.

 

2. 

Unlock the left side cover if required.

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Reviews:

No comments