manualshive.com logo in svg

NEC Express5800/110Ge, User Manual, Page: 211 / 332

Share
Download
NEC Express5800/110Ge User Manual Download Page 211

Chapter 9

Upgrading Your Server

This chapter describes internal optional devices available for the server, procedures for install or
removing such optional devices, and notes on using them.

IMPORTANT:

„

 

Optional devices described in this chapter may be installed or
removed by any user. However, NEC does not assume any liability
for damage to optional devices or the server or malfunctions of the
server resulted from installation by the user. NEC recommends you
ask your service representative for installing or removing any
optional devices.

„

 

Use the options and cables approved by NEC. You will be charged
by any repair of a malfunction, fault, or defect occurring in a server
in which one or more component not approved by NEC are used.

„

 

Always update the system if the hardware configuration is changed
(See Chapter 5 for details).

Summary of Contents for Express5800/110Ge













































































































































































































































































































































Reviews:

No comments