4-32 ESX Server Setup
Setup Procedures upon Installing Guest OS
For the setup procedures upon installing guest OS, see
Guest Operating System Installation Guide
of VMware Infrastructure. For the network configuration, refer to the
User
’
s Guide
packaged with
this guide and the
Server Configuration Guide
of VMware Infrastructure.
NOTE:
It is not recommended that guest OS uses the optical disk drive on the ESX host during
operation. When an optical disk drive is used during the system operation, the product may
not work properly. If an optical disk drive is used, remove the mounted / allocating optical
disk drive and reboot the system.
Check the configuration of the virtual machine from VI client.
If [Host Device] in [Device Type] is selected in CD device settings, untick the following
checkboxes in [Device Status]:
□
connected
□
connected at power on
When an optical disk drive is used during the system operation, the product may not
work properly. If an optical disk drive is used, remove the mounted / allocating optical
disk drive and reboot the system.
Summary of Contents for EXP320K
