NEC EXP320K, User Manual

Page: 66 / 116

4-6 ESX Server Setup
Step 3: Validate FC card
1.
Turn on the display and the peripheral equipment connected to the NEC Express5800/ft
series.
CHECK:
If the power cords are connected to a power controller like a UPS, make sure that
it is powered on.
2.
Detach the front bezel.
3.
Press the POWER switch that is located on the front side of the server. (The in-built LED
lit on this side.)
IMPORTANT:
Do not turn off the power before the "NEC" logo appears.
After a while, the "NEC" logo will appear on the screen.
While the "NEC" logo is displayed on the screen, NEC Express5800/ft series is
performing the power-on self test (POST) to check itself. For details, see the separate
volume of User
’
s Guide.
CHECK:
If the server finds errors during POST, it will interrupt POST and display the
error message. See the separate volume of User
’
s Guide.
CPU/IO module 0
Power LED
CPU/IO module 0
Status LED
CPU/IO module 1
Power LED
CPU/IO module 1
Status LED
CPU/IO module 1 CPU/IO module 1
Power switch
Front side of device
CPU/IO module 0 CPU/IO module 0
POWER switch